Automatic Vertical Plastic Raw Material Color Mixer Machine With
Stainless Steel Mixing Silo
plastic raw material mixer machine
1. Brief introduction of plastic raw material mixer machine :
1. Drying by normal drying machine, since the material is still, hot
wind penetration is insufficient, the material is partially heated,
the material will agglomerate easily and result in jams and blocks,
so complete dry effect can not be reached. The design of this
machine includes two stages of spiral rapid transports. The first
stage is to move the raw material to the barrel. The second stage
is to rapidly lift the material to the top of barrel and scatter it
in shape of umbrella. Hot wind will blow around from the center of
the bottom of the barrel. Hot wind will blow around from the center
of the bottom of the barrel. Hot wind will blow upwards and
penetrate the raw material, dynamic drying with complete heat
exchange is conducted.
2. Since the raw material in the barrel is continuously rolling, hot
wind is continuously blowing from the center,so mixing and drying
is synchronously conducted,so it saves time and power.Ifdrying is
not needed,dry switch can be turned off,then the machine has only
fuction of mixing.this machine can also be used for mixing of
granulate material and powder material.
3. The barrel body,spiral vanes,shaft,cylinder,support frame and the
parts which touch the raw material are all made of stainless steel.
4. When the material need clearing,openthe material clearing opening
and let the spiral vanes rotate in counter direction.Material
clearing can therefore be sinply operated.
2. Parameters of plastic raw material mixer machine :
AC380V 50HZ 3P
Load volume (kg)